Showing posts with label flashing samsung corby. Show all posts
Showing posts with label flashing samsung corby. Show all posts

Saturday, September 24, 2011

Samsung Corby Flashing/Patching/GUI Modding (s3653,s3650)

Okay folks listen up..this is an accurate tutorial IMO tested and written by myself. Before following this tut make sure you have a stable power supply / backed up your phone memory /removed your memory card,sim and above all battery charge above 80%

Ps- this tutorials works on both s3650 and s3653

THIS TUTORIAL IS DIVIDED INTO 2 SECTIONS

1st section: Guide on how to flash your phone (same method applies to both models s3650 and s3653)

2nd section: Guide on how to apply patches/GUI mods (themes) to your phone (go here to see how a patched corby looks like)




lets do it :)

Section 1: The flashing part

you'll need :
1)S3650XEIJ2 Firmware: get here
2)Multi loader v5.56 (5.60 wont work)
3)Samsung mobile USB modem software 1.0 : get both here
                 
Steps
1)install samsung mobile usb modem (THIS IS ESSENTIAL), and extract S3650XEIJ2.rar to a folder

2)Connect your mobile usb cable to the computer without the PHONE!

3)Press Volume down button and camera button at once and turn on the phone while holding those 2 buttons

4)now this screen should come up :

             
5)now connect your phone to the usb cable and open the Multi Loader 5.56..
Multi Loader screen shot


Step 1: put a tic on 'full download'.. leave others alone
         
Step 2:For BOOT choose "boot files" folder from the extracted S3650XEIJ2 Firmware

           For AMSS select apps_compressed.bin

           For Rsrc1 select Rsrc_S3650_Open_Europe_Slav.rc1 (the name may vary but extension should be the same '.rc1' )

           For Factory FS select FactoryFs_S3650_Open_Europe_Slav.ffs (the name may vary but the extension should be the same '.ffs' )
         
          Ignore 'FOTA' , 'Tune' and 'ETC'


Step 3: Click Port Search and when found put a tick


Step 4: Then Click download and wait till it finishes.. and then unplug the usb cable.. remove the battery and turn on your new phone! :D :D

This tutorial will continue from "section 2: the patching part (and GUI Mod)"
               
IF YOU HAVE ANY QUESTIONS FEEL FREE TO ASK